Are you having trouble with your Nissan Kicks remote start? Many owners face this issue.
The Nissan Kicks is a reliable and popular SUV. But remote start problems can be frustrating. It is a convenient feature, especially on cold mornings or hot afternoons. When it stops working, it can disrupt your routine. This blog will help you understand common reasons why the remote start might fail.
By knowing these reasons, you can troubleshoot and fix the problem. Keep reading to learn more about making your Nissan Kicks remote start work again.

Credit: www.autocan.ca
Common Causes
Experiencing issues with your Nissan Kicks remote start can be frustrating. Several common causes might be behind this problem. Knowing these can help in troubleshooting. Let’s explore some of the most frequent reasons why your remote start system might not be working.
Dead Key Fob Battery
A dead key fob battery is a very common cause. The remote start system relies on the key fob’s signal. If the battery is weak or dead, it won’t send the signal. Replacing the battery often fixes the issue. Check if other functions on the key fob work. This can help confirm if the battery is the problem.
Faulty Remote Start System
A faulty remote start system can also be the culprit. The system might have a malfunction or a programming error. Sometimes, the issue lies within the car’s software. Other times, hardware components might be at fault. A professional diagnostic is often needed to pinpoint the exact problem. Regular maintenance can help prevent these issues.

Credit: www.youtube.com
Initial Checks
If your Nissan Kicks remote start is not working, don’t panic. Start with some initial checks before seeking professional help. These basic steps can often resolve the issue.
Check Key Fob Battery
The key fob battery might be weak or dead. This is a common reason for remote start failures. Replace the battery with a fresh one. Ensure you use the correct type of battery.
To change the key fob battery:
- Open the key fob. Use a small flathead screwdriver to pry it open.
- Remove the old battery.
- Insert the new battery. Make sure the positive side faces up.
- Close the key fob. Snap it shut until you hear a click.
Ensure Car Is In Park
The car must be in park for the remote start to work. If the gear shift is in any other position, the remote start system will not activate.
To check the gear shift:
- Look at the gear indicator on the dashboard.
- Ensure the “P” symbol is highlighted.
If the car is not in park, shift it to the “P” position. Then, try the remote start again.
Advanced Troubleshooting
Advanced troubleshooting for the Nissan Kicks remote start system can be crucial. It ensures your remote start works seamlessly. Sometimes, basic troubleshooting isn’t enough. You need to dig deeper.
Inspect Wiring
Start by examining the wiring. Look for any visible damage. Wires can wear out over time. Check for any cuts or frays. These can disrupt the connection.
Use a multimeter to check the wiring continuity. This helps in identifying any breaks. Ensure all connections are tight. Loose connections can cause the remote start to fail.
Inspect the wiring harness. Make sure it is securely connected. A loose or damaged harness can affect the system. Replace any faulty wires immediately.
Check Starter Components
Next, focus on the starter components. The starter relay could be faulty. Test it with a multimeter. If it doesn’t show proper readings, replace it.
Inspect the starter motor. It should function correctly. Listen for any unusual noises. Unusual sounds often indicate issues. Replace the starter motor if necessary.
Check the battery. A weak battery can cause problems. Ensure it is fully charged. Sometimes, a simple battery replacement solves the issue.
Test the ignition switch. It should turn smoothly. A faulty ignition switch can prevent the remote start from working. Replace it if you find any issues.
Advanced troubleshooting ensures your Nissan Kicks remote start works flawlessly. Regular checks and maintenance help prevent problems.
Software Issues
Experiencing issues with the Nissan Kicks remote start can be frustrating. Many times, these problems stem from software issues. Fortunately, addressing these issues is often straightforward. Let’s delve into some key areas you should check.
Update Car Firmware
Firmware updates are crucial for the smooth operation of the vehicle’s systems. Car manufacturers release updates to fix bugs and improve performance.
- Check the Nissan website for the latest firmware update.
- Download the update to a USB drive.
- Insert the USB drive into the car’s USB port.
- Follow the on-screen instructions to complete the update.
Updating the firmware can resolve many software-related issues. It ensures your car’s systems are up-to-date.
Reset The System
If updating the firmware does not solve the problem, try resetting the system. This can clear any temporary glitches.
- Turn off the car and remove the key from the ignition.
- Disconnect the battery for about 15 minutes.
- Reconnect the battery and start the car.
Resetting the system can help restore the remote start functionality. It is a simple yet effective troubleshooting step.
By keeping the firmware updated and knowing how to reset the system, you can avoid many software-related issues with your Nissan Kicks remote start.
Environmental Factors
Environmental factors can significantly impact the functionality of your Nissan Kicks remote start. Understanding these factors can help you diagnose and address issues effectively. Let’s explore some common environmental factors affecting the remote start system.
Check Temperature Conditions
Temperature plays a crucial role in your Nissan Kicks remote start functioning. If it’s too cold or too hot, the system may fail to activate. The vehicle’s battery and other electronic components can be affected by extreme temperatures.
- Extreme cold can cause battery voltage to drop, affecting the remote start.
- Extreme heat can impact the engine and electronic sensors.
Ensure your vehicle is in a moderate temperature range to avoid these issues.
Interference From Other Devices
Other electronic devices can interfere with your Nissan Kicks remote start system. Devices like mobile phones, Wi-Fi routers, and other remote controls can cause signal disruption.
Device | Potential Interference |
---|---|
Mobile Phones | Signals can overlap, causing delays. |
Wi-Fi Routers | Can block remote start signals. |
Other Remote Controls | May interfere with the system’s frequency. |
Keep these devices away from your vehicle when using the remote start to ensure a clear signal.
Professional Help
When your Nissan Kicks remote start is not working, professional help may be needed. Sometimes, the problem may be more complex than a simple fix. A mechanic can diagnose and resolve the issue quickly.
When To Visit A Mechanic
Knowing when to visit a mechanic is crucial. If your remote start fails frequently, it is time to seek professional help. Here are some signs:
- The remote start does not respond at all.
- The car starts but stops shortly after.
- There are strange noises during the start process.
If you notice any of these signs, do not delay a visit to your mechanic. Ignoring these issues may lead to bigger problems.
Choosing The Right Service
Choosing the right service is important for fixing your Nissan Kicks remote start. Look for a reputable mechanic. Here is what to consider:
Criteria | Details |
---|---|
Experience | Ensure the mechanic has experience with Nissan vehicles. |
Reviews | Check online reviews for positive feedback. |
Warranty | Look for services that offer a warranty on their work. |
Choosing the right mechanic ensures your vehicle is in good hands. This can save you time and money in the long run.
Preventive Measures
Preventive measures can ensure your Nissan Kicks remote start system works flawlessly. Simple steps can make a big difference. Regular maintenance and protecting the key fob are key areas to focus on.
Regular Maintenance
Regular maintenance keeps the remote start system in top condition. Check the battery levels often. A weak battery can cause issues. Ensure the remote start system software is up-to-date. Visit a certified Nissan service center for updates. Inspect the car’s wiring and connections. Faulty wiring can disrupt the system. Address any electrical issues immediately.
Protecting Key Fob
Protecting the key fob is crucial. Avoid exposing it to extreme temperatures. High heat or cold can damage the electronics. Keep the key fob away from water. Moisture can cause it to malfunction. Store it in a secure place. Avoid dropping or rough handling. Use a protective cover. This can prevent scratches and damage. Replace the key fob battery regularly. A fresh battery ensures strong signals.
User Manual Tips
Experiencing issues with your Nissan Kicks remote start can be frustrating. Sometimes, the solution lies in the user manual. Understanding these tips can save you time and stress. Here are a few pointers straight from the manual.
Refer To Manufacturer Guide
Always refer to the manufacturer guide first. The manual provides specific instructions for your Nissan Kicks model. It includes detailed steps for troubleshooting remote start issues. Reading the guide can help you identify the problem quickly.
Commonly Overlooked Instructions
Some instructions in the manual are easy to miss. Ensure the key fob battery is not dead. Check if all doors are closed securely. Make sure the hood is not open. These simple checks can resolve remote start problems.
Another tip is to ensure the vehicle is in “Park”. The remote start won’t work if the car is in gear. Following these often overlooked steps can often fix the issue.

Credit: www.ebay.com
Frequently Asked Questions
Why Is My Nissan Kicks Remote Start Not Working?
The remote start may not work due to a dead battery, poor signal, or faulty remote.
How Do I Reset The Nissan Kicks Remote Start?
To reset, turn the ignition on and off three times within ten seconds. Then, press the remote start button.
Can Cold Weather Affect Nissan Kicks Remote Start?
Yes, cold weather can affect the battery and signal, causing the remote start to fail.
Is There A Fuse For Nissan Kicks Remote Start?
Yes, check the fuse box under the hood for a blown fuse related to the remote start system.
What Should I Do If My Remote Start Is Not Responding?
Check the battery in the remote, ensure the car is in park, and try again. If it still doesn’t work, consult a mechanic.
Conclusion
Resolving issues with the Nissan Kicks remote start can be straightforward. Check the battery and key fob first. Ensure the car is in park with the doors closed. Sometimes, software updates may be needed. If problems persist, consult a professional.
Regular maintenance can prevent future issues. Keeping your Nissan Kicks in top shape ensures reliability. By following these steps, you can enjoy the convenience of remote start.